Concrete flooring is usually thought of as a material that is designed to be used for spaces such as a garage or warehouse. Although this is the case, concrete can also be poured outside as a part of your landscape design or as a separate space in your backyard for an additional patio. Regardless of where you decide to pour your concrete, certain specifications need to be considered before beginning your concrete-pouring project; otherwise, your concrete project can become a concrete disaster.
Concrete Site Preparation
Concrete flooring cannot be laid on the naked ground. Even if the ground seems smooth enough, it can still result in an uneven finished product. Instead of laying the concrete directly on the dirt, you must prepare the site for pouring.
To do this, cover the area you have dug for the concrete floor with a vapor barrier. A vapor barrier is designed to prevent moisture from coming up through the ground. If the site is not prepared properly, it results in cracks and other imperfections once the concrete dries. After the vapor barrier has been laid, gravel should be poured over it and leveled before you begin to pour the concrete over it.
Materials to Make Concrete Floor
Before mixing the concrete, it is important to realize that more than just concrete is needed to make the concrete floor. As discussed above, you will need materials such as gravel and a vapor barrier before you begin. If you begin to mix the concrete and realize that you do not have everything you need in the beginning, your concrete will begin to dry in the bucket.
Other possible materials for the concrete flooring that you may consider using include steel rods and wire mesh for additional structural strength and support; these type of materials are ideal for more complex projects.
Timing and Possible Imperfections
Plan each step of time as this is crucial and directly relevant to the outcome of your concrete flooring. The idea behind a concrete floor is to have a surface that is smooth from cracks along with having an even level, proper elevation and durability to last for years to come. You must efficiently time operations – such as jointing, curing and finishing – since it could result in undesirable characteristics.
Possible imperfections that could arise from not planning your project on a timely basis include poor drainage, unevenness, low resistance to wear, scaling, cracking, dusting and a higher potential for curling.
If you are looking for attractive commercial flooring, visit http://www.thelondonfloorcompany.co.uk.